UAP High Security Escutcheon

Features Include:

The UAP High Security Escutcheon comes in 3 finishes – PVD Gold, Mirror Polished and Satin Stainless Steel, and has been designed to colour match with the UAP door knob in order to give perfect co-ordination to a front door. The high security escutcheon has several security features including a bevelled edge. The bevelled edge makes it a lot more difficult to grip the escutcheon with pliers in order to pull it off. Another security feature are the high tensile strength fixing bolts, which secures to the escutcheon to the door.

  • High Security
  • Secured by Design approved
  • Made from 316 grade stainless steel
  • Salt spray tested to ASTM B117 for 2,000 hours
  • Each  handle comes with a LIFETIME coating guarantee!
  • Distance between screw holes: 38mm
Secured by Design

Available in:

PVD Gold PVD Gold
Mirror Polished Mirror Polished
Satin Stainless Satin Stainless

Features Include:

 
High security
Secured by Design approved
Contemporary design with a smooth finish
Bevelled edge makes gripping more difficult to pull it off
High tensile strength fixing bolts
Suitable for all composite and hardwood doors only
Tested to ISO 9227:2012
Made from 316 grade Stainless Steel
Each escutcheon comes with a LIFETIME coating guarantee!
Distance between screw holes: 38mm

The UAP High Security Escutcheon comes in 3 finishes - PVD Gold, Mirror Polished and Satin Stainless Steel, and has been designed to colour match with the UAP door knob in order to give perfect co-ordination to a front door. The high security escutcheon has several security features including a bevelled edge. The bevelled edge makes it a lot more difficult to grip the escutcheon with pliers in order to pull it off. Another security feature are the high tensile strength fixing bolts, which secures to the escutcheon to the door.

Each high security escutcheon is made from 316 grade stainless steel, and is part of the UAP Nanocoast range. The UAP Nanocoast range of products are specifically designed for areas which are within a 25 mile radius of the coast, or within 5 miles of highly populated industrial areas. Each straight pull handle has been salt spray tested to ASTM B117 for 2,000 hours, and comes with an industry first LIFETIME coating guarantee, as the escutcheon will not pit, rust or corrode no matter what environments you put them in!

nanocoast logo

The design of the high security escutcheon has been developed to be contemporary, and it also comes with a smooth finish to make any door look professional. It is suitable for all composite doors and hardwood doors only, and has also been tested to ISO 9227:2012!

Product Codes:

Finish Code Material Construction Coating Guarantee
PVD Gold HSEPVDG-NANOCOAST Stainless Steel LIFETIME
Mirror Polished HSEMPSS-NANOCOAST Stainless Steel LIFETIME
Satin Stainless HSESSS-NANOCOAST Stainless Steel LIFETIME

 

Technical Info:

 

testing icon

At UAP we are constantly striving to improve on the products we already supply as well as develop new, pioneering ranges and practical product solutions.

With an in house testing centre and product developer, each stage of the development process is thorough, from the initial design right down to the final product. In house 3D printing technology allows for further and more precise advancement of our products which are then expertly manufactured and put through stringent testing conditions using in house test equipment – ensuring all products are designed to the highest standards: 

UV Sunlight Testing Machine

Used to test the colourfast of products, the UV machine measures the stamina of the escutcheon finish, testing how quickly it will fade in sunlight. It does this using UV lights which the products are left under for 2000 hours.

 

Salt Spray Testing Machine

This machine tests the corrosion resistance of the esuctcheons and many other products. The salt spray cabinet produces a corrosive environment, by releasing a dense saline fog into the chamber which the products are exposed to. This creates accelerated corrosion to the product and allows us to test how well the product would stand up in harsher environments. Stainless steel products are part of the Nanocoast range, and are salt spray tested to ASTM B117:2005 for 2,000+ hours, and we offer a lifetime coating guarantee on these products.

TS007:2014 Report Data:

4.2 One Star Rating

For a cylinder to receive a one star rating it shall meet the requirements of BC 3621:2007 + A1 2009 Annex A clauses A5 and A6. Additionally, cylinder shall meet the following minimum requirements of BS EN 1303:2005:

| 1 | 6 | 0 | 0 | 0 | C | 5 | 2* |

Requirement Result  Pass/Fail 
Sample meets the requirements of BS 3621 clauses A5 and A6 Evidence supplied

WTE/C/002/O

PASS
Sample meets the requirements of BS EN 1303 Evidence supplied

WIL 344846

PASS

 

4.3 Two Star Rating

For security hardware to receive a two star rating it shall not be possible to withdraw the deadbolt of either test lock assembly to its normal disengaged position when tested in accordance with PAS 24:2012:

Requirement Result  Pass/Fail 
Sample in timber test block passed A.11 tested specified in Clause 5? Sample meets the requirement PASS
Sample in PVC test block passed A.11 test specified in Clause 5? Sample meets the requirement PASS

 

For security hardware to receive a 2 star rating it shall fall within the scope of BS EN 1906 shall meet the following classification:

| 1 | 6 | — | — | — | 3 | — | — |

5.2 Security Hardware

For security hardware to receive a two star rating it shall not be possible to withdraw the deadbolt of either test lock assembly to its normal disengaged position when tested in accordance with PAS 24:2012:

Requirement Result  Pass/Fail 
PAS24 A.3 Security Hardware Test

Plywood Block

Attacks were made with a small chisel, norbar (hook) and mole grips (curved) to try to lever and pull the escutcheon off for 3 minutes, but entry was not achieved.

Attacks were made with a 4.2mm traction screw, screwdriver and small chisel to try to chisel the escutcheon away around the cylinder. Further attacks were made to insert the screw into the cylinder and achieve to lever it out. Total attack time 3 minutes, but entry was not achieved.

PASS

 

Brochures and Tech Sheets:

Nanocoast Products Guarantee:

UAP Ltd distribute a wide range of 304 and 316 grade stainless steel Nanocoast products, including but not exclusive to; door knockers, letterplates, door viewers, door numerals, door handles, pull handles, escutcheons, hinges, letterplate shrouds and identity card slots.

Nanocoast products are available in PVD gold, mirror polished and satin stainless finishes, and we guarantee these products and finishes against the following:

Surface Coating Failure

Coating Guarantee = the sooner of “the guarantee supplied for the door or window from the manufacturer” or “Lifetime”

We guarantee that Nanocoast products will not tarnish for the lifetime that they are on the door subject to;

1. The products are applied to a door, window frame or door panel and no item of door furniture on the door, window frame or door panel are sealed or fixed using any form of silicone sealant or the like.

2. The products are fixed correctly and the right way around using the correct fixings, and are not scratched or damaged at any time during the installation process or thereafter.

3. The products are cleaned with a lemon based very mild soap solution and a soft cloth once a month, or every 2 weeks in areas of high sea salt such as coastal areas. At no point should any form of cleaning agents be used.

4. No claim will be accepted for any product that is scratched or mutilated or fitted incorrectly.

5.  The guarantee only applies if the hardware is fixed to the original door for which it was bought and fitted by the installer. The guarantee will cease immediately if the hardware is removed from the original door or window.

Mechanical Failure

Mechanical Guarantee = the sooner of “the guarantee supplied for the door or window from the manufacturer” or “10 Years”

We guarantee that the above products will not fail mechanically during the 10 year guarantee period subject to the conditions outlined above.

Claiming Under the Guarantee

Every product must be inspected before they are fitted on to a door, window frame or door panel for any defects. If any defects are found then the product must not be fitted and the fault reported immediately to UAP Limited. Any product fitted is assumed to have been inspected and approved as being fit for purpose.

To make a claim under the guarantee, UAP Limited must receive in writing the product code of the item, the full details of the problem, the date the product was purchased, the date of manufacture of the unit in question and the address of the installation.

We will require all ‘faulty’ items to be sent to ourselves at the address below by first class recorded delivery post. We will then examine the item in question and confirm whether the item is covered by the guarantee. If it is not covered by the guarantee we will advise you, the customer, in writing of the reason for rejecting the claim.

Limitations of the Guarantee

UAP Limited’s guarantee will be limited solely to the replacement of the item purchased from UAP. There is no liability whatsoever for consequential damages or costs, howsoever calculated or incurred. UAP Limited will enforce and rely fully upon their terms and conditions of sale in all aspects other than the limitation set out above. UAP will also pay for the cost of the recorded delivery, if and only if, the product is deemed to be covered by the terms of the guarantee set out above.

Payment of the Guarantee

UAP reserve the right to discharge the guarantee claim in the form of replacement products at the customer’s normal buying price at the time of the complaint being received by UAP Limited.

Time Limit on Guarantee Claims

UAP will only be liable for claims made within a maximum period of 10 years from the date of purchase of the products from UAP Limited.

Correspondence Address for all Guarantee Claims

Any guarantee claim must adhere to the system set out above in all respects and must be made in writing to: UAP Limited, Orbital 60, Dumers Ln, Bury, BL9 9UE.

The terms of this guarantee may be varied by UAP Limited at any time at our own discretion. Please see www.uapcorporate.com for up to date product guarantees.

Encountered a problem? No Worries!

We have prepared a comprehensive troubleshooting guide that should help you with the most common problems you might run into.

2024 © UAP Limited trading as UAP TradeLocks | All rights reserved

Website by Fresh Mill & Roman Klabal

Cookies | Sign in to your account