UAP Framemaster 12 Inch Fire Resistant Stainless Steel Letterplate
The Framemaster letterplate is lined with special intumescent material which expands to 50 times its size, blocking the hole in the cavity and preventing smoke coming through the cavity.The Framemaster letterplate is compliant to BS EN1634-3:2004 smoke leakage regulations.
- 60 minutes fire rated
- Uses special heat absorbers to stop hot screws melting the plastic
- Intumescent activated at 5 degrees lower than most in the market
- Designed for 40-80mm thick composite and wooden doors
- 180 degree opening flap means the flap will not snap off when opened too far
- Manufactured from grade 316 stainless steel
- LIFETIME coating guarantee
- Product Codes
- Technical Info
- Product Testing
- Product Videos
- Brochures & Tech Sheets
- Product Guarantee
|60 minutes fire rated|
|Lined with special intumescent material which expands to 50 times its size|
|Uses special heat absorbers to stop hot screws melting the plastic|
|Intumescent activated at 5 degrees lower than most in the market|
|Designed for 40-80mm thick composite and wooden doors|
|Outward facing brushes create the Anti-Vandal feature as it prevents vandals from placing unwanted items into the cavity|
|Outwards facing brushes also means better draught proofing and makes it easier to post letters through|
|180 degree opening flap means the flap will not snap off when opened too far|
|Matt finished plastic frame conceals any scratches that may be caused by screwdrivers during installation|
|Blind bolts to the exterior of the letterplate prevents the outer frame being unscrewed from the door externally|
|An internal water seal prevents water getting into the door or panel, and stops letters getting wet|
|Ultra-flexible springs can withstand the letterbox flap opening thousands of times without breaking|
|Revolutionary Patent pending self-aligning screw boss makes screwing the inner and outer frames together easy|
|Designed for 40-80mm for wooden and composite doors|
|Conforms to many standards and testing requirements including BS EN 1303:2005|
Fire Testing Standards:
|Protection Time||Door Material||Certifire Specification|
|FD60 - 60 Minutes||Timber||No|
|FD30 - 30 Minutes||Nan Ya Composite||No|
The UAP Fire Resistant Anti Vandal 300mm Framemaster 12 inch letterplate comes with both an external and internal flap to protect your customer's homes, and is available in 40-80mm depths for composite and wooden doors. It has been tested for up to 60 minutes on wooden and timber doors!
The Framemaster letterplate is lined with special intumescent material which expands to 50 times its size, blocking the hole in the cavity and preventing smoke coming through the cavity. The intumescent is activated at 5 degrees lower than most other intumescent material in the market, meaning that the cavity will be blocked quicker. The letterplate also uses special heat absorbers which stops the screws, once they are red hot, melting the plastic around then and causing the letterbox to fall off.
The Framemaster letterplate is compliant to BS EN1634-3:2004 smoke leakage regulations.
On the UAP Framemaster 12 inch letterplate there are many features that are not found on standard letterboxes. This includes the trademarked Anti-Vandal facility. Each year house fires are started by vandals putting fireworks through letterboxes. Each UAP Anti-Vandal letterplate has the brushes outward facing (a feature no other letterplate in the industry has). This gives 3 great benefits:
1 - Having brushes on the front of the door acts as a visual deterrent to vandals. As the internal cavity is not easily accessible, it makes it a lot harder to put lit fireworks etc. into the cavity.
2 - It is easier for postmen to navigate letters through the brushes, so you won't end up receiving crinkled letters anymore.
3 - The brushes stop draughts at the point of entry, making the letterplate draught-proof.
Another great feature of all UAP letterplates is that each letterplate flap can open to 180 degrees, meaning that it should not snap, and making letterplate flaps snapping off a thing of the past. Many letterplates in the industry only open to 90 degrees, so when too much force is applied when lifting the flap up, it causes them to snap off. The ultra-flexible springs means that they can withstand thousands of openings without breaking, making them last even longer. Also, an internal water seal also prevents water getting into the door or panel, which stops letters getting wet as they are posted through, and also helps to prevent the flaps from pitting or rusting.
PVD gold, mirror polished and satin stainless finishes are part of the Nanocoast range. These products are made from 316 grade stainless steel, and are specifically designed for areas which are within a 25 mile radius of the coast, or within 5 miles of highly populated industrial areas. Unlike brass and zinc based products, the Nanocoast products will not pit, rust or corrode no matter what environments you put them in. This means that the products will last longer, and keep your customers happy. What's more, every Nanocoast product comes with a lifetime coating guarantee!
|Finish||40-80mm Door Opening||Plastic Frame Colour||Flap Material Construction||Coating Guarantee|
|PVD Gold||FMB1248PVDG-FR -NANOCOAST||Black||Stainless Steel||LIFETIME|
|Mirror Polished||FMB1248MPSS-FR -NANOCOAST||Black||Stainless Steel||LIFETIME|
|Satin Stainless||FMB1248SSS-FR -NANOCOAST||Black||Stainless Steel||LIFETIME|
|Distance Between Screw Holes||272mm|
|Cavity Hole Size||257mm x 42mm|
At UAP we are constantly striving to improve on the products we already supply as well as develop new, pioneering ranges and practical product solutions.
With an in house testing centre and product developer, each stage of the development process is thorough, from the initial design right down to the final product. In house 3D printing technology allows for further and more precise advancement of our products which are then expertly manufactured and put through stringent testing conditions using in house test equipment – ensuring all products are designed to the highest standards:
Letterplate Flap Cycle Machine
By replicating the action of opening and closing the letterplates flaps, the machine can determine the durability of the hinge mechanism on the product. The flaps are repeatedly opened and closed to ensure they can withstand thousands of openings without snapping or breaking, promising a product that will last much longer than others in the industry. The process is repeated to 100,000 repetitions – with only 15,000 required by testing standards. Tests are performed in accordance with BS EN 13724:2013.
This standardised security test measures the ability of a letterplate to resist attack by fishing; a method of gaining keys through a letterbox using a hook. A letterplate must prevent the accessibility of a hook through it, and this is tested by inserting an aluminium rod, which is 6mm in diameter and 1200mm long, through the letterplate and seeing whether or not it can touch a target of 20mm in diameter, which has been placed on a table on the other side of the door.
If the rod is unable to touch the target, then it passes the technical standard. If not then a further test is conducted to see if a disc 0.075kg can be retrieved through the door.
Salt Spray Test
This machine tests the corrosion resistance of the letterplates. The salt spray cabinet produces a corrosive environment, by releasing a dense saline fog into the chamber which the letterplates are exposed to. This creates an accelerated corrosion of the letterplate and allows us to test how well the letterplate would stand up in harsher environments.
The letterplates are tested for differing lengths of time depending on the standard requirements; 480 hours for zamak and aluminium based letterplates where we offer a 5 year inland coating guarantee, and in the case of stainless steel Nanocoast letterplates, we test for 2,000 hours where we offer a LIFETIME coating guarantee anywhere in the country, as the letterplates will not pit or rust.
Tensile Strength Test
The tensile strength machine tests the resistance of a material to breaking under tension. It is used to see how well the letterplates perform when pressure is applied to them. The letterplates are attached to pieces of timber or plastic to see how well the fixings perform with the letterplate, which gives a more accurate test on the overall letterplate performance.
All Weather Machine
When placed in the all-weather machine, the letterplates are subjected to conditions including high UV exposure using a Xenon Arc Lamp which will accelerate UV degradation and measure how well a letterplate can last in extreme conditions.
Other conditions such as rain and extreme heat can be generated by the machine to expose the letterplates to all kinds of environments. This allows us to continually improve the letterplates and make them so they last longer in all kinds of different environments.
UAP Fire Resistant Letterplate Tech SheetSize: 1 MB | Type: pdf
UAP Fire Rated Brochure 2018Size: 6 MB | Type: pdf
UAP Letterplate Guarantee 2018Size: 99 KB | Type: pdf
EN 13724:2013 Letterplate Test ReportSize: 120 KB | Type: pdf
UAP Ltd distribute a wide range of letterplates, with flaps made from aluminium and Nanocoast 304 or 316 grade stainless steel.
The letterplates are available in a range of colours, and we guarantee the letterplates and finishes against the following:
Surface Coating Failure
Coating Guarantee = the sooner of “the guarantee supplied for the door or window from the manufacturer” or “5 years inland” on aluminium based flap letterplates or “Lifetime” on Nanocoast 304 or 316 grade stainless steel based flap letterplates.
We guarantee that the letterplates will not tarnish on the door for the guarantee period given above subject to;
1. The letterplates are applied to a door or door panel, and no item of door furniture on the door or door panel are sealed or fixed using any form of silicone sealant or the like.
2. The letterplates are fixed correctly and the right way around with the brushes facing to the outside using the correct fixings, and are not scratched or damaged at any time during the installation process or thereafter.
3. Nanocoast 304 or 316 grade stainless steel based letterplates are cleaned with a lemon based very mild soap solution and a soft cloth once a month, or every 2 weeks in areas of high sea salt such as coastal areas. At no point should any form of cleaning agents be used.
4. Aluminium based letterplates are installed inland (defined as 25 miles from the coast or 5 miles from highly populated industrial areas) and are cleaned monthly with a moist cloth. At no point should any form of cleaning agents be used.
5. No claim will be accepted for any letterplate that is scratched or mutilated or fitted incorrectly.
6. The guarantee only applies if the letterplate is fixed to the original door for which it was bought and fitted by the installer. The guarantee will cease immediately if the letterplate is removed from the original door or door panel.
Mechanical Guarantee = the sooner of “the guarantee supplied for the door or window from the manufacturer” or “5 years inland” on aluminium based flap letterplates or “10 years” on Nanocoast 304 or 316 grade stainless steel based flap letterplates.
We guarantee that the letterplates will not fail mechanically the door for the guarantee period given above subject to the conditions outlined above.
Claiming Under the Guarantee
Every product must be inspected before they are fitted on to a door, window frame or door panel for any defects. If any defects are found then the product must not be fitted and the fault reported immediately to UAP Limited. Any product fitted is assumed to have been inspected and approved as being fit for purpose.
To make a claim under the guarantee, UAP Limited must receive in writing the product code of the item, the full details of the problem, the date the product was purchased, the date of manufacture of the unit in question and the address of the installation.
We will require all ‘faulty’ items to be sent to ourselves at the address below by first class recorded delivery post. We will then examine the item in question and confirm whether the item is covered by the guarantee. If it is not covered by the guarantee we will advise you, the customer, in writing of the reason for rejecting the claim.
Limitations of the Guarantee
UAP Limited’s guarantee will be limited solely to the replacement of the item purchased from UAP. There is no liability whatsoever for consequential damages or costs, howsoever calculated or incurred. UAP Limited will enforce and rely fully upon their terms and conditions of sale in all aspects other than the limitation set out above. UAP will also pay for the cost of the recorded delivery, if and only if, the product is deemed to be covered by the terms of the guarantee set out above.
Payment of the Guarantee
UAP reserve the right to discharge the guarantee claim in the form of replacement products at the customer’s normal buying price at the time of the complaint being received by UAP Limited.
Time Limit on Guarantee Claims
UAP will only be liable for claims made within a maximum period of 10 years from the date of purchase of the products from UAP Limited.
Correspondence Address for All Guarantee Claims
Any guarantee claim must adhere to the system set out above in all respects and must be made in writing to: UAP Limited, Unit 1 Albert Close Trading Estate, Whitefield, Manchester, M45 8EH.
The terms of this guarantee may be varied by UAP Limited at any time at our own discretion. Please see www.uapcorporate.com for up to date product guarantees.
Encountered a problem? No Worries!
We have prepared a comprehensive troubleshooting guide that should help you with the most common problems you might run into.