UAP 243mm Split Spindle Pad Door Handle
Features Include:
Designed for comfort and ease of operation, the UAP Split Spindle Pad front door handle has a 243mm long backplate, offering a high quality designed front door handle. Each front door handle has a pad shaped external handle. Handles are non-handed and can be used as either a left or right hand, allowing it to fit a range of profiles. The UAP Lever Pad uPVC door handles can be inline and operate from one single spindle or independently from each side of the door using two inline spindles or two offset spindles. When the door is closed the pad will not open the door without the key.
- External Pad handle gives a very comfortable grip when operating externally
- 62/92mm Centres Split Spindle Lever/Pad
- Handle are made of Aluminium
- Each handle comes with a 5 year coating guarantee!
Available in:
White
Black
- Overview
- Product Codes
- Technical Info
- Product Testing
- Brochures & Tech Sheets
- Product Guarantee
- Troubleshooting
Features Include:
| High quality designed handle |
| Has a 243mm long backplate |
| External Pad handle gives a very comfortable grip when operating externally |
| 62/92mm Centres Split Spindle Lever/Pad |
| Handle are made of Aluminium |
| Each handle comes with a 5 year coating guarantee |
Designed for comfort and ease of operation, the UAP Pad front door handle has a 243mm long backplate, offering a high quality designed front door handle. Each front door handle has a pad shaped external handle. Handles are non-handed and can be used as either a left or right hand, allowing it to fit a range of profiles.
The Pad front door handle is available in two finishes White and Black. The handles are made from Aluminium, and comes with a 5 year colour fast guarantee.
The UAP split spindle pad handle can be used on UPVC, timber or composite doors as long as the lock within the door is suitable. Lever/Pad handles are for split spindle locks, also known as split follower locks. Lever pad handles have offset handles operatuing independently from each other on opposite sides of the door using two offset spindles. The external pad handle does not allow the latch to be withdrawn or the door to be opened from outside without the use of a key. This would prevent unauthorised access from outside if you have not fully locked your door. An example of this would be if you have just closed but not locked the door when bringing in your shopping.Combine with the UAP Kinetica 3* Kitemarked euro cylinder with the door handles in order to give you the best security to achieve a 3 star Kitemark status for PAS24 doors.
Product Codes:
| Finish | 243mm Backplate | Material Construction | Coating Guarantee |
| Black | DH243LPB-SPLIT-SIGNATURE | Aluminium | 5 year colour fast |
| White | DH243LPW-SPLIT-SIGNATURE | Aluminium | 5 year colour fast |
Technical Info:
Sizes:
| Distance Between Screw Holes | 211mm |
| Door Handle Length | 243mm |
| Door Handle Height | 33mm |
At UAP we are constantly striving to improve on the products we already supply as well as develop new, pioneering ranges and practical product solutions.
With an in house testing centre and product developer, each stage of the development process is thorough, from the initial design right down to the final product. In house 3D printing technology allows for further and more precise advancement of our products which are then expertly manufactured and put through stringent testing conditions using in house test equipment – ensuring all products are designed to the highest standards:
Handle Cycle Testing Machine
The machine imitates the action of the door being pushed down in an opening and repeats this 20,000 times, to test its durability. The axial and rotational operation of lever handles is being tested to make sure in can withstand numerous openings and remain functional. UAP perform the test in accordance with BS EN 1906:2015
UV Sunlight Testing Machine
Used to test the colourfast of plastic and anodised products, the UV machine measures the stamina of the door handle finish, testing how quickly it will fade in sunlight. It does this using UV lights which the products are left under for 2000 hours.
Brochures and Tech Sheets:
Door Handle Guarantee:
UAP Ltd distribute a wide range of door handles, made from aluminium, zamak and Nanocoast 316 grade stainless steel.
The door handles are available in a range of colours, and we guarantee the door handles and finishes against the following:
Surface Coating Failure
Coating Guarantee = the sooner of “the guarantee supplied for the door or window from the manufacturer” or “5 years inland” on aluminium and zamak based door handles or “Lifetime” on Nanocoast 316 grade stainless steel based door handles.
We guarantee that the door handles will not tarnish on the door for the guarantee period given above subject to;
1. The door handles are applied to a door or door panel, and no item of door furniture on the door or door panel are sealed or fixed using any form of silicone sealant or the like.
2. The door handles are fixed correctly and the right way around using the correct fixings, and are not scratched or damaged at any time during the installation process or thereafter.
3. Nanocoast 316 grade stainless steel based door handles are cleaned with a lemon based very mild soap solution and a soft cloth once a month, or every 2 weeks in areas of high sea salt such as coastal areas. At no point should any form of cleaning agents be used.
4. Aluminium and zamak based door handles are installed inland (defined as 25 miles from the coast or 5 miles from highly populated industrial areas) and are cleaned monthly with a moist cloth. At no point should any form of cleaning agents be used.
5. No claim will be accepted for any door handle that is scratched or mutilated or fitted incorrectly.
6. The guarantee only applies if the door handle is fixed to the original door for which it was bought and fitted by the installer. The guarantee will cease immediately if the door handle is removed from the original door or door panel.
Mechanical Failure
Mechanical Guarantee = the sooner of “the guarantee supplied for the door or window from the manufacturer” or “5 years inland” on aluminium and zamak based door handles or “10 years” on Nanocoast 316 grade stainless steel based door handles.
We guarantee that the door handles will not fail mechanically the door for the guarantee period given above subject to the conditions outlined above.
Claiming Under the Guarantee
Every product must be inspected before they are fitted on to a door, window frame or door panel for any defects. If any defects are found then the product must not be fitted and the fault reported immediately to UAP Limited. Any product fitted is assumed to have been inspected and approved as being fit for purpose.
To make a claim under the guarantee, UAP Limited must receive in writing the product code of the item, the full details of the problem, the date the product was purchased, the date of manufacture of the unit in question and the address of the installation.
We will require all ‘faulty’ items to be sent to ourselves at the address below by first class recorded delivery post. We will then examine the item in question and confirm whether the item is covered by the guarantee. If it is not covered by the guarantee we will advise you, the customer, in writing of the reason for rejecting the claim.
Limitations of the Guarantee
UAP Limited’s guarantee will be limited solely to the replacement of the item purchased from UAP. There is no liability whatsoever for consequential damages or costs, howsoever calculated or incurred. UAP Limited will enforce and rely fully upon their terms and conditions of sale in all aspects other than the limitation set out above. UAP will also pay for the cost of the recorded delivery, if and only if, the product is deemed to be covered by the terms of the guarantee set out above.
Payment of the Guarantee
UAP reserve the right to discharge the guarantee claim in the form of replacement products at the customer’s normal buying price at the time of the complaint being received by UAP Limited.
Time Limit on Guarantee Claims
UAP will only be liable for claims made within a maximum period of 10 years from the date of purchase of the products from UAP Limited.
Correspondence Address for all Guarantee Claims
Any guarantee claim must adhere to the system set out above in all respects and must be made in writing to: UAP Limited, Orbital 60, Dumers Ln, Bury, BL9 9UE.
The terms of this guarantee may be varied by UAP Limited at any time at our own discretion. Please see www.uapcorporate.com for up to date product guarantees.
Encountered a problem? No Worries!
We have prepared a comprehensive troubleshooting guide that should help you with the most common problems you might run into.
