Commercial Range Pull Handles

Features Include:

  • Supplied complete with M8 fixings to suit timber doors
  • Available in 19mm diameters
  • For push/pull applications select an appropriate push plate for the other side of the door
  • Pull handles of 300mm centres meet the requirements of BS 8300

Available in:

Stainless Steel Stainless Steel

Features Include:

                 
Supplied complete with M8 fixings to suit timber doors
Available in 19mm diameters
For push/pull applications select an appropriate push plate for the other side of the door
Pull handles of 300mm centres meet the requirements of BS 8300
 

Product Codes:

Type Code Size Finish
D Handle IH-C-LA06 300 x 19mm SSS
D Handle IH-C-LA77 450 x 19mm SSS
D Handle IH-C-LA100 600 x 19mm SSS

Type Code Size Finish
D Handle Back to Back IH-C-LA08 300 x 19mm SSS
D Handle Back to Back IH-C-LA78 450 x 19mm SSS
D Handle Back to Back IH-C-LA101 600 x 19mm SSS

Technical Info:

Sizes:

 

testing icon

At UAP we are constantly striving to improve on the products we already supply as well as develop new, pioneering ranges and practical product solutions.

With an in house testing centre and product developer, each stage of the development process is thorough, from the initial design right down to the final product. In house 3D printing technology allows for further and more precise advancement of our products which are then expertly manufactured and put through stringent testing conditions using in house test equipment – ensuring all products are designed to the highest standards:

UV Sunlight Testing Machine

Used to test the colourfast of plastic and anodised products, the UV machine measures the stamina of the pull handle finish, testing how quickly it will fade in sunlight. It does this using UV lights which the products are left under for 2000 hours.

Salt Spray Testing Machine

This machine tests the corrosion resistance of the pull handles and many other products. The salt spray cabinet produces a corrosive environment, by releasing a dense saline fog into the chamber which the products are exposed to. This creates accelerated corrosion to the product and allows us to test how well the product would stand up in harsher environments.

Brochures and Tech Sheets:

Door Handle Guarantee:

10 Year Guarantee is subject to correct installation, maintenance and application.

Mechanical Failure

Mechanical Guarantee = the sooner of “the guarantee supplied for the door or window from the manufacturer” or “10 years”

We guarantee that the handles will not fail mechanically during the 10 year guarantee period subject to the conditions outlined above.

Claiming Under the Guarantee

Every product must be inspected before they are fitted on to a door, window frame or door panel for any defects. If any defects are found then the product must not be fitted and the fault reported immediately to UAP Limited. Any product fitted is assumed to have been inspected and approved as being fit for purpose.

To make a claim under the guarantee, UAP Limited must receive in writing the product code of the item, the full details of the problem, the date the product was purchased, the date of manufacture of the unit in question and the address of the installation.

We will require all ‘faulty’ items to be sent to ourselves at the address below by first class recorded delivery post. We will then examine the item in question and confirm whether the item is covered by the guarantee. If it is not covered by the guarantee we will advise you, the customer, in writing of the reason for rejecting the claim.

Limitations of the Guarantee

UAP Limited’s guarantee will be limited solely to the replacement of the item purchased from UAP. There is no liability whatsoever for consequential damages or costs, howsoever calculated or incurred. UAP Limited will enforce and rely fully upon their terms and conditions of sale in all aspects other than the limitation set out above. UAP will also pay for the cost of the recorded delivery, if and only if, the product is deemed to be covered by the terms of the guarantee set out above.

Payment of the Guarantee

UAP reserve the right to discharge the guarantee claim in the form of replacement products at the customer’s normal buying price at the time of the complaint being received by UAP Limited.

Time Limit on Guarantee Claims

UAP will only be liable for claims made within a maximum period of 10 years from the date of purchase of the products from UAP Limited.

Correspondence Address for all Guarantee Claims

Any guarantee claim must adhere to the system set out above in all respects and must be made in writing to: UAP Limited, Orbital 60, Dumers Ln, Bury, BL9 9UE.

The terms of this guarantee may be varied by UAP Limited at any time at our own discretion. Please see www.uapcorporate.com for up to date product guarantees.

Encountered a problem? No Worries!

We have prepared a comprehensive troubleshooting guide that should help you with the most common problems you might run into.

2024 © UAP Limited trading as UAP TradeLocks | All rights reserved

Website by Fresh Mill & Roman Klabal

Cookies | Sign in to your account