Intelligent Hardware 51.05 3 Lever Mortice Sash Lock

Features Include:

  • 65mm & 75mm backsets
  • Available in Satin Stainless Steel, Polished Stainless Steel, Black, Bronze, and Evershine Brass

 

Available in:

Satin Stainless Satin Stainless
Black Black
Polished Stainless Polished Stainless
Bronze Bronze
Evershine Brass Evershine Brass

Features Include:

     
Available in 65mm and 75mm backset heights
Available in Satin Stainless Steel, Polished Stainless Steel, Black, Bronze, and Evershine Brass

Product Codes:

 

Finish 65mm 75mm
Satin Stainless Steel IH-SASH.51.05.65.SSS IH-SASH.51.05.75.SSS
Polished Stainless Steel IH-SASH.51.05.65.PSS IH-SASH.51.05.75.PSS
Bronze IH-SASH.51.05.65.BNZ IH-SASH.51.05.75.BNZ
Black IH-SASH.51.05.65.BLK IH-SASH.51.05.75.BLK
Evershine Brass IH-SASH.51.05.65.ES IH-SASH.51.05.75.ES

 

Technical Info:

testing icon

Cyclic Operation

The cyclic operation machine tests the operation and use of each multi point lock. The machine works by fitting the multi point lock in to a door, and then adding a handle and cylinder. The machine will then cycle test the lock by turning the cylinder to unlock; pull the handle down to open the door; close the door; lift the handle to engage the multi point hooks, and then finally lock the cylinder. This gives a true test of how the multi point lock will work in a real life situation.

Each multi point lock is cycle tested to 200,000 cycles.

cyclic-operation

Salt Spray Test

This machine tests the corrosion resistance of the multi point locks. The salt spray cabinet produces a corrosive environment, by releasing a dense saline fog into the chamber which the multi point locks are exposed to. This creates an accelerated corrosion of the MPL and allows us to test how well the locks would stand up in harsher environments.

The multi point locks are tested to BS EN1670 grade 4 for 420 hours.

Intelligent Hardware Brochure

Size: 21 MB | Type: pdf

Product Guarantee

We guarantee the multi point lock and finish against the following;

Surface Coating Failure

We guarantee that the multi point locks have a 5 year inland coating guarantee (defined as 25 miles from the coast or 5 miles from a highly populated industrial area) subject to;

1. The multi point locks are applied to a door and no item of door furniture on the door or window frame are sealed or fixed using any form of silicone sealant or the like

2. The multi point locks are fixed correctly using the correct fixings and are not scratched or damaged at any time during the installation process or thereafter

3. The multi point locks are cleaned monthly with a moist cloth and not with any form of cleaning agent

4. The internal workings are lightly sprayed with 3 in 1 or a light machine oil (or similar) every 12 weeks

5. No claim will be accepted for any multi point lock that is scratched or mutilated or fitted incorrectly

Mechanical Failure

We guarantee that the multi point locks will not fail mechanically in normal use during the 10 year guarantee period subject to the conditions outlined above.

Encountered a problem? No Worries!

We have prepared a comprehensive troubleshooting guide that should help you with the most common problems you might run into.

2024 © UAP Limited trading as UAP TradeLocks | All rights reserved

Website by Fresh Mill & Roman Klabal

Cookies | Sign in to your account