Ultimate protection against rogue traders and bogus callers
Enables homeowners to check a visitors ID without physically opening the door
Acts as a visual deterrent to would-be criminals
Ideal for elderly and vulnerable people
30 minutes fire rated on timber and Nan Ya composite doors
Available in a 20-40 thickness for uPVC doors and 40-80mm thickness for wooden and composite doors
Available as part of the UAP Nanocoast range which comes with a LIFETIME coating guarantee!
Fire Testing Standards:
FD30 – 30 Minutes
Nan Ya Composite
The UAP identity card slots are the ultimate security accessory for protection against rogue traders and bogus callers. It enables the homeowner to check the ID of a caller without having to open the door; they simply lift up the sliding latch on the inside to allow the caller to slip the card through.
The identity card slots allow the occupier to receive the ID Card easily without the awkward fumbling that occurs when trying to receive it through the letterbox. It also enables the occupier to thoroughly check the ID without the pressure of the caller standing in the doorway. UAP identity card entry slots also acts as a visual deterrent to would ‘be-criminals; it shows them that the homeowner is aware of and prepared for bogus callers.
The zinc based identity card slots (black, white, polished gold and polished chrome) are salt spray tested to ASTM B117 for 480 hours, and come with a 5 year inland guarantee.
The PVD gold and mirror polished identity card slots are made from 304 grade stainless steel, and is part of the UAP Nanocoast range. The UAP Nanocoast range of products are specifically designed for areas which are within a 25 mile radius of the coast, or within 5 miles of highly populated industrial areas. The identity card slot have been salt spray tested to ASTM B117 for 2,000 hours, and comes with an industry first LIFETIME coating guarantee, as the products will not pit, rust or corrode no matter what environments you put them in!
Door Thickness 20-40mm (uPVC Doors)
Door Thickness 40-80mm (Composite Doors)
304 Grade Stainless Steel
304 Grade Stainless Steel
White Powder Coat
Black Powder Coat
Identity Card Slot Dimensions:
ID Card Length = 38mm
ID Card Width = 128mm
Slot Length = 80mm
Slot Width = 3mm
ID Card Plate (Front) Thickness = 10mm
ID Card Plate (Back) Thickness = 9mm
Cavity (Hole) Size Needed = 15mm(w) x 115mm(h)
At UAP we are constantly striving to improve on the products we already supply as well as develop new, pioneering ranges and practical product solutions.
With an in house testing centre and product developer, each stage of the development process is thorough, from the initial design right down to the final product. In house 3D printing technology allows for further and more precise advancement of our products which are then expertly manufactured and put through stringent testing conditions using in house test equipment – ensuring all products are designed to the highest standards:
UV Sunlight Testing Machine
Used to test the colourfast of plastic and anodised products, the UV machine measures the stamina of the identity card entry slot finish, testing how quickly it will fade in sunlight. It does this using UV lights which the products are left under for 2000 hours.
Salt Spray Testing Machine
This machine tests the corrosion resistance of the identity card entry slots and many other products. The salt spray cabinet produces a corrosive environment, by releasing a dense saline fog into the chamber which the products are exposed to. This creates accelerated corrosion to the product and allows us to test how well the product would stand up in harsher environments. Zinc based products are tested to ASTM B117:2005 for 480 hours, where we offer a 5 year inland guarantee. Stainless steel products are part of the Nanocoast range, and are salt spray tested to ASTM B117:2005 for 2,000+ hours, and we offer a lifetime coating guarantee on these products.
UAP Ltd distribute a range of ID card slots and letterplate shrouds, made from aluminium, zamak and Nanocoast 304 or 316 grade stainless steel.
The ID slots and letterplate shrouds are available in a range of colours, and we guarantee the ID slots and letterplate shrouds and finishes against the following:
Surface Coating Failure
Coating Guarantee = the sooner of “the guarantee supplied for the door or window from the manufacturer” or “5 years inland” on aluminium and zamak based ID slots and shrouds or “Lifetime” on Nanocoast 304 316 grade stainless steel based ID slots and shrouds.
We guarantee that the ID slots and shrouds will not tarnish on the door for the guarantee period given above subject to;
1. The ID slots and shrouds are applied to a door or door panel, and no item of door furniture on the door or door panel are sealed or fixed using any form of silicone sealant or the like.
2. The ID slots and shrouds are fixed correctly and the right way around using the correct fixings, and are not scratched or damaged at any time during the installation process or thereafter.
3. Nanocoast 304 or 316 grade stainless steel based ID slots and shrouds are cleaned with a lemon based very mild soap solution and a soft cloth once a month, or every 2 weeks in areas of high sea salt such as coastal areas. At no point should any form of cleaning agents be used.
4. Aluminium and zamak based ID slots and shrouds are installed inland (defined as 25 miles from the coast or 5 miles from highly populated industrial areas) and are cleaned monthly with a moist cloth. At no point should any form of cleaning agents be used.
5. No claim will be accepted for any ID slot or shroud that is scratched or mutilated or fitted incorrectly.
6. The guarantee only applies if the ID slot or shroud is fixed to the original door for which it was bought and fitted by the installer. The guarantee will cease immediately if the ID slot or shroud is removed from the original door or door panel.
Mechanical Guarantee = the sooner of “the guarantee supplied for the door or window from the manufacturer” or “5 years” on aluminium and zamak based ID slots and shrouds or “10 years” on Nanocoast 304 or 316 grade stainless steel based ID slots and shrouds.
We guarantee that the ID slots and shrouds will not fail mechanically on the door for the guarantee period given above subject to the conditions outlined above.
Claiming Under the Guarantee
Every product must be inspected before they are fitted on to a door, window frame or door panel for any defects. If any defects are found then the product must not be fitted and the fault reported immediately to UAP Limited. Any product fitted is assumed to have been inspected and approved as being fit for purpose.
To make a claim under the guarantee, UAP Limited must receive in writing the product code of the item, the full details of the problem, the date the product was purchased, the date of manufacture of the unit in question and the address of the installation.
We will require all ‘faulty’ items to be sent to ourselves at the address below by first class recorded delivery post. We will then examine the item in question and confirm whether the item is covered by the guarantee. If it is not covered by the guarantee we will advise you, the customer, in writing of the reason for rejecting the claim.
Limitations of the Guarantee
UAP Limited’s guarantee will be limited solely to the replacement of the item purchased from UAP. There is no liability whatsoever for consequential damages or costs, howsoever calculated or incurred. UAP Limited will enforce and rely fully upon their terms and conditions of sale in all aspects other than the limitation set out above. UAP will also pay for the cost of the recorded delivery, if and only if, the product is deemed to be covered by the terms of the guarantee set out above.
Payment of the Guarantee
UAP reserve the right to discharge the guarantee claim in the form of replacement products at the customer’s normal buying price at the time of the complaint being received by UAP Limited.
Time Limit on Guarantee Claims
UAP will only be liable for claims made within a maximum period of 10 years from the date of purchase of the products from UAP Limited.
Correspondence Address for all Guarantee Claims
Any guarantee claim must adhere to the system set out above in all respects and must be made in writing to: UAP Limited, Unit 1 Albert Close Trading Estate, Whitefield, Manchester, M45 8EH.
The terms of this guarantee may be varied by UAP Limited at any time at our own discretion. Please see www.uapcorporate.com for up to date product guarantees.