Technical Info:

6 Inch Cabin Hook Sizes:

Overall Length (A) = 152mm

Hook Length (B) = 132mm

Hook Width (C) = 6mm

Fixing Plate Width (D) = 35mm

Fixing Plate Height (D) = 26mm

Fixing Plate Distance Between Screw Holes (D) = 25mm

Eyelet Width (E) = 26mm

Eyelet Height (E) = 35mm

Eyelet Distance Between Screw Holes (E) = 25mm

No of Screws Supplied = 4

8 Inch Cabin Hook Sizes:

Overall Length (A) = 225mm

Hook Length (B) = 200mm

Hook Width (C) = 9mm

Fixing Plate Width (D) = 37mm

Fixing Plate Height (D) = 27mm

Fixing Plate Distance Between Screw Holes (D) = 27mm

Eyelet Width (E) = 27mm

Eyelet Height (E) = 37mm

Eyelet Distance Between Screw Holes (E) = 27mm

No of Screws Supplied = 4

10 Inch Cabin Hook Sizes:

Overall Length (A) = 245mm

Hook Length (B) = 220mm

Hook Width (C) = 10mm

Fixing Plate Width (D) = 37mm

Fixing Plate Height (D) = 27mm

Fixing Plate Distance Between Screw Holes (D) = 27mm

Eyelet Width (E) = 27mm

Eyelet Height (E) = 37mm

Eyelet Distance Between Screw Holes (E) = 27mm

No of Screws Supplied = 4

At UAP we are constantly striving to improve on the products we already supply as well as develop new, pioneering ranges and practical product solutions.

With an in house testing centre and product developer, each stage of the development process is thorough, from the initial design right down to the final product. In house 3D printing technology allows for further and more precise advancement of our products which are then expertly manufactured and put through stringent testing conditions using in house test equipment – ensuring all products are designed to the highest standards:

 Salt Spray Testing Machine

This machine tests the corrosion resistance of the cabin hooks and many other products. The salt spray cabinet produces a corrosive environment, by releasing a dense saline fog into the chamber which the products are exposed to. This creates accelerated corrosion to the product and allows us to test how well the product would stand up in harsher environments. Cabin hooks are tested to ASTM B117:2005 for 480 hours.

Brochures and Tech Sheets:

UAP Security Brochure

Size: 4 MB | Type: pdf

Download

Door Security Guarantee 2018

Size: 98 KB | Type: pdf

Download

UAP Cabin Hooks Tech Sheet

Size: 916 KB | Type: pdf

Download

Door Security Guarantee:

UAP Ltd distributes a wide range of door security products, including but not restricted to door chains; door restrictors; cylinder guards; door stays; door closers; cabin hooks; security mail bags and rack bolt sets.

We guarantee the door security products and finishes against the following:

Surface Coating Failure

Coating Guarantee = the sooner of “the guarantee supplied for the door or window from the manufacturer” or “2 years inland.”

We guarantee that the door security products will not tarnish on the door or window for the guarantee period given above subject to;

1. The door security products are applied to a window, door or door panel, and no item of door or window furniture on the window, door or door panel are sealed or fixed using any form of silicone sealant or the like.

2. The door security product is fixed correctly and the right way around using the correct fixings, and are not scratched or damaged at any time during the installation process or thereafter.

3. The door security product is installed inland (defined as 25 miles from the coast or 5 miles from highly populated industrial areas) and are cleaned monthly with a moist cloth. At no point should any form of cleaning agents be used.

4. No claim will be accepted for any door security product that is scratched or mutilated or fitted incorrectly.

5. The guarantee only applies if the door security product is fixed to the original window or door for which it was bought and fitted by the installer. The guarantee will cease immediately if the door security product is removed from the original window, door or door panel.

Mechanical Failure

Mechanical Guarantee = the sooner of “the guarantee supplied for the door or window from the manufacturer” or “2 years.”

We guarantee that the door security product will not fail mechanically the door or window for the guarantee period given above subject to the conditions outlined above.

Claiming Under the Guarantee

Every product must be inspected before they are fitted on to a door, window frame or door panel for any defects. If any defects are found then the product must not be fitted and the fault reported immediately to UAP Limited. Any product fitted is assumed to have been inspected and approved as being fit for purpose.

To make a claim under the guarantee, UAP Limited must receive in writing the product code of the item, the full details of the problem, the date the product was purchased, the date of manufacture of the unit in question and the address of the installation.

We will require all ‘faulty’ items to be sent to ourselves at the address below by first class recorded delivery post. We will then examine the item in question and confirm whether the item is covered by the guarantee. If it is not covered by the guarantee we will advise you, the customer, in writing of the reason for rejecting the claim.

Limitations of the Guarantee

UAP Limited’s guarantee will be limited solely to the replacement of the item purchased from UAP. There is no liability whatsoever for consequential damages or costs, howsoever calculated or incurred. UAP Limited will enforce and rely fully upon their terms and conditions of sale in all aspects other than the limitation set out above. UAP will also pay for the cost of the recorded delivery, if and only if, the product is deemed to be covered by the terms of the guarantee set out above.

Payment of the Guarantee

UAP reserve the right to discharge the guarantee claim in the form of replacement products at the customer’s normal buying price at the time of the complaint being received by UAP Limited.

Time Limit on Guarantee Claims

UAP will only be liable for claims made within a maximum period of 10 years from the date of purchase of the products from UAP Limited.

Correspondence Address for all Guarantee Claims

Any guarantee claim must adhere to the system set out above in all respects and must be made in writing to: UAP Limited, Orbital 60, Dumers Ln, Bury, BL9 9UE.

The terms of this guarantee may be varied by UAP Limited at any time at our own discretion. Please see www.uapcorporate.com for up to date product guarantees.