Quad Pull Handle
Part of the Designer Pull Handles range, the UAP Quad handle is made from high grade stainless steel, and has an uber modern sleek and minimalist rectangular design, which almost looks like only one component. It has a diameter of 30mm for a sleeker look. This handle is part of the Nanocoast range, coming with a LIFETIME coating guarantee. The bolt through fixing gives a neater finish and as high grade Stainless Steel is used, the product will not rust and so there will be no leakage if it rains. The handle also comes with an Allen Key and 2 Allen Bolts on each of the up-stands, as well as two fixing points with an individual plate on each.
- 30mm diameter for sleeker look
- Handle is made from high grade stainless steel
- Salt spray tested to ASTM B117 for 2,000 hours
- Each handle comes with a LIFETIME coating guarantee!
- 3 fixing methods available – hidden fixings, bolt through and back to back
- Product Codes
- Technical Info
- Product Testing
- Product Videos
- Brochures & Tech Sheets
- Product Guarantee
|Made from high grade stainless steel|
|30mm diameter for sleeker look|
|Easier to grip for those with arthritis or limited hand movement|
|All pull handles have two fixing points with an individual plate on each|
|Comes with an Allen Key and 2 Allen Bolts on each of the up-stands|
|3 fixing methods available - hidden fixings, bolt through and back to back|
|Each pull handle comes with a LIFETIME coating guarantee!|
At UAP we are constantly striving to improve on the products we already supply as well as develop new, pioneering ranges and practical product solutions.
With an in house testing centre and product developer, each stage of the development process is thorough, from the initial design right down to the final product. In house 3D printing technology allows for further and more precise advancement of our products which are then expertly manufactured and put through stringent testing conditions using in house test equipment – ensuring all products are designed to the highest standards:
UV Sunlight Testing Machine
Used to test the colourfast of plastic and anodised products, the UV machine measures the stamina of the pull handle finish, testing how quickly it will fade in sunlight. It does this using UV lights which the products are left under for 2000 hours.
Salt Spray Testing Machine
This machine tests the corrosion resistance of the pull handles and many other products. The salt spray cabinet produces a corrosive environment, by releasing a dense saline fog into the chamber which the products are exposed to. This creates accelerated corrosion to the product and allows us to test how well the product would stand up in harsher environments.
Brochures and Tech Sheets:
UAP Pull Handle SolutionsSize: 9 MB | Type: pdf
Pull Handle Guarantee 2018Size: 97 KB | Type: pdf
Back to Back Fixing InstructionsSize: 132 KB | Type: pdf
Hidden Fixing InstructionsSize: 156 KB | Type: pdf
Bolt Through Fixing InstructionsSize: 127 KB | Type: pdf
Pull Handle Guarantee:
UAP Ltd distribute a wide range of 304 and 316 grade stainless steel Nanocoast pull handles.
Nanocoast pull handles are available in mirror polished and satin stainless finishes, and we guarantee these products and finishes against the following:
Surface Coating Failure
Coating Guarantee = the sooner of “the guarantee supplied for the door or window from the manufacturer” or “Lifetime”
We guarantee that Nanocoast pull handles will not tarnish for the lifetime that they are on the door subject to;
1. The pull handles are applied to a door, window frame or door panel and no item of door furniture on the door, window frame or door panel are sealed or fixed using any form of silicone sealant or the like.
2. The pull handles are fixed correctly and the right way around using the correct fixings, and are not scratched or damaged at any time during the installation process or thereafter.
3. The pull handles are cleaned with a lemon based very mild soap solution and a soft cloth once a month, or every 2 weeks in areas of high sea salt such as coastal areas. At no point should any form of cleaning agents be used.
4. No claim will be accepted for any pull handle that is scratched or mutilated or fitted incorrectly.
5. The guarantee only applies if the pull handle is fixed to the original door for which it was bought and fitted by the installer. The guarantee will cease immediately if the pull handle is removed from the original door or window.
Mechanical Guarantee = the sooner of “the guarantee supplied for the door or window from the manufacturer” or “10 years”
We guarantee that the pull handles will not fail mechanically during the 10 year guarantee period subject to the conditions outlined above.
Claiming Under the Guarantee
Every product must be inspected before they are fitted on to a door, window frame or door panel for any defects. If any defects are found then the product must not be fitted and the fault reported immediately to UAP Limited. Any product fitted is assumed to have been inspected and approved as being fit for purpose.
To make a claim under the guarantee, UAP Limited must receive in writing the product code of the item, the full details of the problem, the date the product was purchased, the date of manufacture of the unit in question and the address of the installation.
We will require all ‘faulty’ items to be sent to ourselves at the address below by first class recorded delivery post. We will then examine the item in question and confirm whether the item is covered by the guarantee. If it is not covered by the guarantee we will advise you, the customer, in writing of the reason for rejecting the claim.
Limitations of the Guarantee
UAP Limited’s guarantee will be limited solely to the replacement of the item purchased from UAP. There is no liability whatsoever for consequential damages or costs, howsoever calculated or incurred. UAP Limited will enforce and rely fully upon their terms and conditions of sale in all aspects other than the limitation set out above. UAP will also pay for the cost of the recorded delivery, if and only if, the product is deemed to be covered by the terms of the guarantee set out above.
Payment of the Guarantee
UAP reserve the right to discharge the guarantee claim in the form of replacement products at the customer’s normal buying price at the time of the complaint being received by UAP Limited.
Time Limit on Guarantee Claims
UAP will only be liable for claims made within a maximum period of 10 years from the date of purchase of the products from UAP Limited.
Correspondence Address for all Guarantee Claims
Any guarantee claim must adhere to the system set out above in all respects and must be made in writing to: UAP Limited, Unit 1 Albert Close Trading Estate, Whitefield, Manchester, M45 8EH.
The terms of this guarantee may be varied by UAP Limited at any time at our own discretion. Please see www.uapcorporate.com for up to date product guarantees.
Encountered a problem? No Worries!
We have prepared a comprehensive troubleshooting guide that should help you with the most common problems you might run into.