The traditional black iron door chain has a classic design that is perfect for cottages and period properties, as well as large wooden doors and rustic interiors. Made from solid cast iron the black iron door chain is durable and has superior strength, with over a 100kg snapping force.
The traditional black iron door chain from UAP has a classic design that is perfect for cottages and period properties, as well as large wooden doors and rustic interiors. Made from solid cast iron, the black iron door chain is durable and has superior strength, with over a 100kg snapping force. It is black powder coated to give a high quality finish.
The black iron door chain is a practical solution for protecting entrance doors in residential and commercial properties, allowing the user to open the door just wide enough to verify who is there.
The UAP black iron door hardware range is available in a number of different products including black iron front door handles, black iron letterplates and black iron door chains.
Black Iron Door Chain
Black Iron Door Handle 243mm
Black Iron Door Handle 219mm
Black Iron 4 Inch Door Numbers
Black Iron 4 Inch Door Letters
Black Iron Plain Letterplate
Black Iron Internal Letterplate
Black Iron Fleur de Lys Letterplate
6″ Black Iron Lion’s Head Door Knocker
2 Piece Black Iron Lion’s Head Door Knocker
Black Iron Round Door Knocker
6″ Black Iron Victorian Urn
Door Chain Length
Number of Links
Receiver Plate Length
Receiver Plate Width
Chain Holder Length
Chain Holder Width
Solid Cast Iron
At UAP we are constantly striving to improve on the products we already supply as well as develop new, pioneering ranges and practical product solutions.
With an in house testing centre and product developer, each stage of the development process is thorough, from the initial design right down to the final product. In house 3D printing technology allows for further and more precise advancement of our products which are then expertly manufactured and put through stringent testing conditions using in house test equipment – ensuring all products are designed to the highest standards:
Tensile Strength Testing Machine
The tensile strength machine tests the resistance of a material to breaking under tension. It is used to see how well our door chains perform when pressure is applied to them. The products are attached to pieces of timber or plastic to see how well the fixings perform with the overall product, which gives a more accurate test on the overall product performance. Products are tested to 100kg and are in accordance with ISO EN16281:2013 and DHF TS 003:2012 standards:
UAP Ltd distribute a wide range of black iron hardware, made from iron, including but not limited to door handles; letterplates; door chains; numerals and door knockers.
We guarantee the black iron hardware and finishes against the following:
Surface Coating Failure
Coating Guarantee = the sooner of “the guarantee supplied for the door or window from the manufacturer” or “5 years inland.”
We guarantee that the black iron hardware will not tarnish on the door for the guarantee period given above subject to;
1. The black iron hardware is applied to a door or door panel, and no item of door furniture on the door or door panel are sealed or fixed using any form of silicone sealant or the like.
2. The black iron hardware is fixed correctly and the right way around using the correct fixings, and are not scratched or damaged at any time during the installation process or thereafter.
3. The black iron hardware is installed inland (defined as 25 miles from the coast or 5 miles from highly populated industrial areas) and are cleaned monthly with a moist cloth. At no point should any form of cleaning agents be used.
4. No claim will be accepted for any black iron hardware that is scratched or mutilated or fitted incorrectly.
5. The guarantee only applies if the black iron hardware is fixed to the original door for which it was bought and fitted by the installer. The guarantee will cease immediately if the black iron hardware is removed from the original door or door panel.
Mechanical Guarantee = the sooner of “the guarantee supplied for the door or window from the manufacturer” or “5 years.”
We guarantee that the black iron hardware will not fail mechanically the door for the guarantee period given above subject to the conditions outlined above.
Claiming Under the Guarantee
Every product must be inspected before they are fitted on to a door, window frame or door panel for any defects. If any defects are found then the product must not be fitted and the fault reported immediately to UAP Limited. Any product fitted is assumed to have been inspected and approved as being fit for purpose.
To make a claim under the guarantee, UAP Limited must receive in writing the product code of the item, the full details of the problem, the date the product was purchased, the date of manufacture of the unit in question and the address of the installation.
We will require all ‘faulty’ items to be sent to ourselves at the address below by first class recorded delivery post. We will then examine the item in question and confirm whether the item is covered by the guarantee. If it is not covered by the guarantee we will advise you, the customer, in writing of the reason for rejecting the claim.
Limitations of the Guarantee
UAP Limited’s guarantee will be limited solely to the replacement of the item purchased from UAP. There is no liability whatsoever for consequential damages or costs, howsoever calculated or incurred. UAP Limited will enforce and rely fully upon their terms and conditions of sale in all aspects other than the limitation set out above. UAP will also pay for the cost of the recorded delivery, if and only if, the product is deemed to be covered by the terms of the guarantee set out above.
Payment of the Guarantee
UAP reserve the right to discharge the guarantee claim in the form of replacement products at the customer’s normal buying price at the time of the complaint being received by UAP Limited.
Time Limit on Guarantee Claims
UAP will only be liable for claims made within a maximum period of 10 years from the date of purchase of the products from UAP Limited.
Correspondence Address for all Guarantee Claims
Any guarantee claim must adhere to the system set out above in all respects and must be made in writing to: UAP Limited, Unit 1 Albert Close Trading Estate, Whitefield, Manchester, M45 8EH.
The terms of this guarantee may be varied by UAP Limited at any time at our own discretion. Please see www.uapcorporate.com for up to date product guarantees.